Category: HPLC, FPLC, & LC/MS | Subcategory: Autosamplers
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler
Agilent  1200 Series G1367D HiP-ALS SL+ Autosampler

Agilent 1200 Series G1367D HiP-ALS SL+ Autosampler

ITEM: 30884 In Stock
Price: $8,500.00
Free 90 Day Warranty
One Year Upgrade Available
Tested & Serviced Prior to Shipping

The Agilent Technologies 1200 Series G1367D HiP-ALS SL+ Autosampler adds maximum flexibility and fast injection cycles to your Agilent HPLC system. Whenever high sample throughput and speed of analysis are points to consider, the G1367D is the autosampler to choose. Featuring a standard injection range from 0.1 to 100 μl, the G1367D Autosampler provides increased sample injection speed for high sample throughput. Other features include: overlapped injections for increased productivity, minimal delay volumes for rapid gradients and fast equilibration when bypassing the autosampler after sample injection, flexible and convenient sample handling with different types of sample containers.

Specifications:
GLP featuresEarly maintenance feedback (EMF), electronic records of
maintenance and errors
CommunicationsController-area network (CAN). RS232C, APG-remote standard,
optional four external contact closures and BCD vial number output
Safety featuresLeak detection and safe leak handling, low voltages in maintenance
areas, error detection and display
Injection range0.1 – 40 µl in 0.1 µl increments Up to 100 µl with extended injection
volume (hardware modification required)
PrecisionTypically < 0.25% RSD from 5 – 40 µl, Typically < 0.5% RSD from
2 – 5 µl, Typically < 0.7% RSD from 1 – 2 µl volume. Measured with
injections of benzylalcohol.
Pressure rangeUp to 600 bar (8700 psi)
Sample viscosity range0.2 – 5 cp
Sample capacity2 × well plates (MTP) + 10 × 2 ml vials 108 x 2-mL vials in2 x 54 vial
plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate
plus 10 additional 2 mL vials
54 Eppendorf tubes (0.5/1.5/2.0mL) in 2 x 27 Eppendorf tube plate
Also compatible with the Agilent 1200 Series sample capacity
extension for further expansion of the sample capacity
Injection cycle timeTypically < 17 s using following standard conditions: Default draw
speed: 100 µl/min Default eject speed: 100 µl/min Injection volume:
5 µl
Carry-overTypically < 0.004% using the following conditions:
Column: Agilent Zorbax SB-C18, 21x50mm 1.8μm (P/N 827700-902)
Mobile Phase: A: H2O + 0.05% TFA, B: ACN+ 0.045 TFA
Gradient: 0.1min 10% B, 3.1 min 90% B, 3.2 min 90 % B, 3.21 10 %B,
4.5min stop
Flow rate: 0.5 ml/min
Temperature: 25C
Wavelength: 257 nm
Sample : 1200 ng/ul Chlorhexidine (disolved in H2O with 0.1% TFA),
1ul injected and measure both on Agilent 6410 QQQ and G1315C DAD
Wash solution: H2O with 0.1% TFA (5 sec)
Weight34.2 lbs. (15.5 kg)
Dimensions13.5″ W x 17″ D × 8″ H inches (34.5 × 44 x 20 cm)
Line voltage100 – 240 VAC, ±10% Wide-ranging capability
Line frequency50 or 60 Hz, ±5%
Power consumption (apparent power)300 VA Maximum
Power consumption (active power)200 W Maximum
Ambient operating temperature4 to 55 °C
Ambient non-operating temperature-40 to 70 °C
Humidity< 95%, at 25 to 40 °C Non-condensing
Operating AltitudeUp to 2000 m (6500 ft)
Non-operating altitudeUp to 4600 m (14950 ft) For storing the
autosampler
Safety standardsIEC, CSA, UL Installation Category II, Pollution Degree 2

Similar Products

Agilent G1811A XY Autosampler

VIEW MORE DETAILS

Agilent 1200 Series HPLC System

VIEW MORE DETAILS

IBZ MESSTECHNIK GMBH ChiraLyser Polarimetric Detector

VIEW MORE DETAILS

Agilent 1100 Series HPLC System with G1315A DAD Detector and G1312A Binary Pump

VIEW MORE DETAILS