Agilent 1260 Infinity II MCT Multicolumn Thermostat (G7116A)

The Agilent 1260 Infinity II MCT Multicolumn Thermostat (G7116A) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85°C.

High-pressure valves rated at 800 bar enable a wide range of applications such as automatic selection of up to four columns, sample preparation for analyte enrichment or matrix removal, or alternating column regeneration.

Specifications:

Operating principle: Thermostatted column compartment with dual, independent Peltier-element. Solvent pre-heating and still-air operation for reduction of chromatographic band-broadening under UHPLC-conditions.
Temperature range: 10 °C below ambient (minimum 4 °C) to 85 °C settable in steps of 0.1 K Temperature stability: ±0.1 °C Temperature accuracy ±0.5 °C (with calibration for 40 °C)
Temperature precision: 0.05 °C
Independent Temperature zones: 2 in single device Column capacity 4 columns of up to 300 mm length plus InfinityLab Quick-Connect fittings
Heat-up/cool-down time: 5 min from ambient to 40 °C 10 min from 40 °C to 20 °C <25 min from 25 °C to 85 °C
Solvent heat exchangers: For pre-column solvent heating, G7116A is equipped with a Quick-Connect Heat Exchanger Large ID (0.17 mm capillary, 3 µL internal volume)
Power: 100-240V, 60Hz
Weight: 27.6 lbs (12.5 kg)
Dimensions: 17.1″ W x 17.2″ D x 6.3″ H inches (43.5 x 46.5 x 16 cm)

Installation service & installation kits available.