Category: HPLC, FPLC, & LC/MS | Subcategory: LC-MS / LC-MS/MS
Agilent 6410B Triple Quadrupole LC/MS System With Agilent 1200/1290 HPLC
ITEM: 30208
This product is currently out of stock, please check our complete line of in-stock LC-MS / LC-MS/MS by clicking the green link below or give one of the members of our sales team a call today at (860) 691-2213 so we can help you find a suitable replacement.
The Agilent 6410B Triple Quadrupole LC/MS achieves sensitivity and resolution specifications after autotune without manual user intervention.
You can use one or more of the Agilent 6400 Triple Quadrupole LC/MS combinations to quantitate trace organic compounds in complex matrices:
- Food safety studies
- Environmental studies
- Drug discovery
- Toxicology
- Forensics
- Bioanalysis
Paired with Agilent’s 1260 and 1290 Infinity Series LCs, the 6400 Series Triple Quadrupole MS delivers sensitive, reproducible analyses of target compounds in complex matrices.
Features:
- Single point of control
- Single-point data system method capability with full control of Agilent 1100 and 1200 Series HPLC systems and 6410 Triple Quadrupole LC/MS
- Time programming:
- Positive/negative polarity switching in a time segment
- Scan and SIM or MRM (plus other modes of data collection)
- Solvent divert through calibrant delivery system valve
- Possible 99-time segments with potential 99 MRMs per-time window
- Wide range of ionization sources
- Electrospray (ESI)
- Nanospray with HPLC-Chip Cube MS interface
- Atmospheric pressure chemical ionization (APCI)
- Multimode source (simultaneous ESI and APCI)
- Autotune
- Automated optimization of ion optics and mass axis calibration
- Solvent declustering
- Countercurrent gas
- Detector
- High-energy conversion dynode and removable electron multiplier horn
- Vacuum system
- One triple-stage turbomolecular pump with one mechanical pump
Specifications: | |
MS/MS Sensitivity and Repeatability | 0.5 pg of reserpine injected on column, ESI source, three concurrent MRM acquisitions, quantifying on the transition m/z 609 to 195. |
Signal-To-Noise Ratio | <20:1, where noise = 5x RMS. |
Mass Resolution | Three settings (FWHM) Unit: 0.7 u; Wide: 1.2 u; Widest: 2.5 u |
Mass Accuracy | 0.1 u across the mass range |
Mass Stability | <0.1 u in 24 h |
Dynamic Range | >6.5 × 106 |
Mass Range | m/z 15–1,650 |
Scan Rate | 5,200 u/sec |
Scan Modes | MS scan, MS/MS product ion scan, MRM, MS/MS neutral loss/gain scan and precursor ion scan, SIM Minimum MRM dwell time: 5 ms with 10 MRMs |
MRM Transitions | 99 per time segment, thousands possible with multiple segments |
Positive/Negative Polarity Switching | Time segment dependent; Inter-segment delay of 1.5 sec |
Collision Cell | High-pressure, hexapole with linear acceleration |
Cross-talk | None detectable |
Technical Specifications: | |
Dimensions | 18.5" H x 43.5" W x 26" D (47 x 111 x 66 cm) |
Weight | 236.5 lbs (107.5 kg) |
Power | 200/240 V, 50/60 Hz, 15A, 2700W |
The Agilent 1290 Infinity LC System embodies the next generation of UHPLC - with the exceptional reliability and robustness you expect from Agilent, plus breakthrough technologies to maximize the efficiency of your business. The 1290 Infinity II LC delivers unmatched separation and detection performance for ultimate confidence in your results. Highest sample capacity and fastest injection cycles help you to achieve highest throughput for any application. Seamless integration into your current laboratory infrastructure and smooth method transfer from legacy equipment facilitates nondisruptive transition to highest productivity and lowest total cost of ownership (TCO).
The Agilent 1200/1290 Infinity LC System includes:
- G1379B Degasser
- G1312B Binary Pump SL
- G1367D Hip ALS SL
- Tray
- Vacuum Pump
- Computer Pre-loaded with Software, Flat Screen Monitor, Keyboard, Mouse and Cables