Category: Hoods | Subcategory: Glove Boxes
Labconco Precise Controlled Atmosphere Glove Box with Automatic Pressure Controller
ITEM: 30891 In Stock
- Free 90 Day Warranty
- One Year Upgrade Available
- Tested & Serviced Prior to Shipping
Or call (860) 691-2213
The Labconco Precise Controlled Atmosphere Glove Box with Automatic Pressure Controller provide a leak-tight environment for work with contamination-sensitive materials. Procedures where low levels of oxygen or moisture are important, such as work with organometallics, alternative energy cells or hydrophilic chemicals, are typical applications for these economical glove boxes.
Features:
- One-piece molded, medium-density polyethylene shell
- Dry powder epoxy-coated steel superstructure
- 1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
- Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
- Black, chemical-resistant work surface sealed to the glove box floor
- Pressure relief valve that activates at pressure/vacuum above 6 inches or below -6 inches of water gauge
- Pressure relief valve vent, 4" nominal diameter
- Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
- Neoprene gloves, size 9 3/4
- Fluorescent lamp, 22 watts, with easy replacement from the top
- Switches for light and innermost interior electrical receptacle
- Approximately 13 cubic feet of interior space in main chamber
- 11.0" nominal ID x 12.0" long transfer chamber
- Six manual valves for purging and filling of both main chamber and transfer chamber and for drying train connections
- Main chamber pressure gauge with readings from -5 to +5 inches of water gauge
- Transfer chamber pressure gauge with readings from 0 to -29 inches of mercury
- Transfer chamber high vacuum sleeve and interior interlocking shelf of dry powder epoxy-coated steel
Specifications: | |
Conformance | UL 3101-1/61010-1, ETL, CAN/CSA C22.2 No. 1010.1 |
Interior Working Width | 33.5" |
Liner Material | Polyethylene |
Number of Glove Ports | Two |
Primary Application | Atmosphere-sensitive materials |
Product Subcategory | Controlled Atmosphere Glove Box |
Required Accessories (not included) | Inert Gas, Supporting Base, Vacuum Source |
Weight | ~260 lbs. (118 kg.) |
Dimensions | 52.7" W x 31.6" D x 40.0" H (140 x 80 x 102 cm) |
Power | 115 V, 60 Hz, 8 A, 1 Ph |
Cat. No. | 5220100 |
The Automatic Pressure Controller is for automatic control of the main chamber pressure, main chamber purging and filling cycles, and transfer chamber evacuation and filling cycles.
Specifications: | |
Weight | 35.5 lbs. (16.1 kg.) |
Power | 115 V, 50/60 Hz |
Cat. No. | 5238600 |