Category: Incubators - Ovens | Subcategory: CO2 Incubators
Nuaire Model NU-4850 US Autoflow Water Jacket Humidified CO2 Incubator, Dual Stack
ITEM: 31358 In Stock
The Nuaire Model NU-4850 US Autoflow Water Jacket Humidified CO2 Incubator, Dual Stack is a dual stack incubator offering optimally controlled temperature and CO2 levels. A 32-bit digitally accurate solid-state single gas analyzer utilizes a filter correlation technique for non-dispersive infrared analysis of CO2. The measurement of CO2 is independent of humidity and temperature variations within the chamber.
Features:
- Closed loop HEPA filteration system designed to minimize contamination at a recirculation rate of 1 chamber volume change every 30 minutes.
- Integrated digital microprocessor-based, solid-state, non-dispersive infrared CO² sensor. Advanced design provides a very stable drift-free output requiring less frequent calibration.
- Outer shell is constructed of 16 gauge, type 304 stainless steel with powder
coat paint finish. - Inner chamber is 16 gauge, type 304-polished stainless steel using coved
corner crevice-free construction. - All stainless steel shelves, shelf supports, and guide rails are easily removable for
decontamination. - Drain valve is located on bottom front of chamber for complete drainage.
General Specifications: | |
Capacity | 6.65 cu. ft. (188.5 L) |
Temperature Range | 5°C above ambient to 55°C |
Temperature Sensitivity | ±0.125° C |
Temperature Accuracy | ±0.0125° C |
CO2 Accuracy | ±0.1 % |
CO2 Recovery to 5.0 | ± 0.2%: Less than 3 minutes |
Power | 115 V, 60 Hz |
Water Jacket | 20 gallon (75.7 L) Capacity |
Dimensions, Exterior (per unit) | 31"W x 25.5"D x 35"H (78.7 x 64.7 x 89 cm) |
Dimensions, Interior (per unit) | 21.5"W x 21"D x 25.5"H (54.6 x 53.3 x 64.7 cm) |