Your Trusted Source for Used Lab Equipment

The Peak Scientific Genius 1051 Nitrogen Generator was developed to provide nitrogen gas and dry air to the Shimadzu LC-MS-8045, 8050 or 8060 for labs with electrical supply of up to 230V. The Genius 1051 features two internal air compressors as standard, removing the reliance on an in-house air supply. The configuration allows users to change the flow ratio of nitrogen and dry air, such that the total flow is 25L/min, split between nitrogen and dry air.

Engineered specifically for the Shimadzu LCMS-8045, LCMS-8050 and LCMS-8060 instruments, the Genius 1051 provides sufficient nitrogen and dry air when these instruments are operated in "standard gas delivery mode". If operating in "high flow gas delivery mode" the Genius 3051 is the most suitable gas generator solution. With one output of phthalate free, high purity nitrogen and one output of dry air, this tailored solution can deliver any combination of gases up to a total of 25L/min and has been tested and approved by Shimadzu for the aforementioned units.

The Genius 10 models are compressor based systems manufactured utilizing Pressure Swing Adsorption and Carbon Molecular Sieve to ensure high performance and supply of analytical instrument grade nitrogen.

Features:

• Small in size – fits under a standard lab bench
• Anti-vibration for maximum reduction of vibration
• Service indication allowing you to plan your maintenance and keep your application uptime at a maximum
• Improved drainage reduces moisture carryover and thus increases reliability
• Reheat technology improves membrane performance and reliability
• Robust control system improves safety and reliability of units
• Shimadzu approved gas solution for LCMS-8050 and LCMS-8060
• Self-contained solution with integrated compressors, no need for an external air supply
• Highly economical source of nitrogen/dry air with low lifetime running costs
• Latest generation high performance compressors for longer service interval
• Easy to use, gas at the push of a button
• Wheels make it easy to maneuver generator around the lab

 

Specifications:
Max Flow Rate	Up to 25 L/min /0.88 CFM of Air & Nitrogen combined
Max Pressure	6.9 bar / 100 psi
Max Relative Humidity	80% Non-Condensing
Max Altitude	2000 Metres
Particles	<0.01μm
Gas Outlets	(2) 1/4" BSPP
Phthalates	None
Suspended Liquids	None
Operating Temperature	5°C - 35°C / 41°F - 95°F
Power	230V 50/60Hz 7.0A
Power Consumption	1610 Watts
Dimensions	23.6" W x 29.5" D x 28.1" H (60 x 75 x 71.3 cm)
Weight	261 lbs. (118.5 kg.)