Category: Chromatography | Subcategory: Column

Pharmacia Biotech BPG Chromatography Column 100/500 mm

Pharmacia Biotech BPG Chromatography Column 100/500 mm Image

ITEM: 31056

This product is currently out of stock, please check our complete line of in-stock Column by clicking the green link below or give one of the members of our sales team a call today at (860) 691-2213 so we can help you find a suitable replacement.

 

Pharmacia Biotech BPG Chromatography Column 100/500 mm ImagePharmacia Biotech BPG Chromatography Column 100/500 mm ImagePharmacia Biotech BPG Chromatography Column 100/500 mm ImagePharmacia Biotech BPG Chromatography Column 100/500 mm Image

The Pharmacia Biotech BPG Chromatography Column 100/500 mm is for process development or biopharmaceutical manufacture, designed for hygienic operation and easy, efficient packing.

Features:

  • Scalable from 100 mm to 450 mm inner diameter (i.d.) and bed volumes from 2 up to 121 liters. Pressure rating from 2.5 bar to 8 bar, depending on column size.
  • Glass column tube allows efficient and reproducible packing.
  • Installation and Operational Qualification Documentation Packages available.
  • Hygienic design and operation. Microbial attachment and growth is prevented through the use of calibrated precision glass, high-grade electropolished stainless steel and an absence of dead pockets.
  • Easy, efficient packing and running with the single-screw adapter.
  • All polymeric materials meet the requirements for USP class VI, described in USP <88> Biological Reactivity Tests, in vivo.

 

Specifications:
Adapter MovementManual
Autoclavable121°C for 30 min, except for the bed support
Bed Height1-26 cm (1)
Bed Height Packing With Extension Max.35 cm (2)
Bed Height Running With Extension Max.45 cm (3)
Bed SupportNet
Bed volume0.3-2 L (4)
Bed Volume Packing With Extension Max.2.7 L (5)
Bed Volume Running With Extension Max.3.5 L (6)
Column Cross Section Area78.5 cm²
Connections25 mm TC
Dimensions18.9" W x 18.9" D x 50" H (48 x 48 x 127 cm)
Footprint18.9" x 18.9" (48 x 48 cm)
Inlet Dimension i.d.4 mm
Material (bed support)Polyamid (PA), Polyetheretherketone (PEEK), Polypropylene (PP)
Material (column tube)Glass Borosilicate 3.3
Material (Lid)316L Stainless Steel (SS)
Material (Seal)Ethylene propylene diene (EPDM), Fluoroethenepropene (FEP)
Material (Stand)316L Stainless Steel (SS)
Operating pressure max.8 bar (116.03 psi)
Operating Temperature4°C - 40°C
Outer Height1270 mm
Porosity10 µm, 12 µm, 23 µm and 54 µm
Surface Finish, Stainless Steel Internal WettedGlass Ra < 0.4 μm, SS UNS S32205, SS UNS S31803, SS ASTM 316L Ra 0.5 μm
Surface Finish Stainless Steel Non-Wetted PartsRa Electropolished 3 μm
Weight15 kg
Column i.d.100 mm
Tube height500 mm

(1) Values achievable without a packing extension. Bed heights are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

(2) Values achievable when a packing extension is used for sedimentation of the bed. 75% of the slurry must fit into the column and extension when the adapter is mounted. Bed volumes are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

(3) Values achievable when the packing extension remains attached to the column for the duration of column use. The adaptor must seal att least 5 cm into the column tube to avoid high tensions in the glass tube. Bed heights are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

(4) Values achievable without a packing extension. Bed heights are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

(5) Values achievable when a packing extension is used for sedimentation of the bed. 75% of the slurry must fit into the column and extension when the adapter is mounted. Bed volumes are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

(6) Values achievable when the packing extension remains attached to the column for the duration of column use. The adaptor must seal att least 5 cm into the column tube to avoid high tensions in the glass tube. Bed heights are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

The ALT Difference

All Items Tested to
Manufacturer Spec

More Than 12,000
Items in Stock

Up to 1-Year
Warranty

Price Match
Guarantee

50%–80%
off Retail