Category: Image Analysis | Subcategory: Imager
Protec Ecomax X-ray Film Processor Model 1186-3-4000
ITEM: 29860
This product is currently out of stock, please check our complete line of in-stock Imager by clicking the green link below or give one of the members of our sales team a call today at (860) 691-2213 so we can help you find a suitable replacement.
The Protec Ecomax X-ray Film Processor Model 1186-3-4000 reduces handling and maximizes efficiency by using pre-defined processing parameters that should produce peak quality images without wasting chemicals or requiring excessive manual operations.
Technical Data:
- Film format: min. 4" x 4" (10 x 10 cm), max. 14" x by any length
- Process time: 100 sec (factory set)
- Capacity:
- Film format (L x W): 4” x 4” (10 x 10 cm) (3 x parallel) 417 films/hr.
- Film format (L x W): 9 1/2” x 7” (24 x 18 cm) (2 x parallel) 148 films/hr.
- Film format (L x W): 9 1/2” x 12” (24 x 30 cm) 74 films/hr.
- Film format (L x W): 17” x 14” (43 x 35 cm) 45 films/hr.
- Developer temperature: 89.6 °F (32 °C) (factory set)
- Dryer temperature: 140 °F (60 °C)
- Film detection: micro sensor
- Replenishment rate: adjustable 0.121 gal or 0.158 gal per 10 square feet (460 ml/m2 or 600ml/m2), automatic
- Replenishment containers: standard 6.5 gal tanks
- Anti-oxidation: automatic in 20 min intervals, turn off possible
- Anti-crystallization: automatic in 20 min intervals
- Tank volumes Developer / Fixer / Water: 0.6 / 0.6 / 0.55 gal (2.3 / 2.3 / 2.1 Liter)
- Water consumption: 0.26 gal/min (1.0 l/min) during processing; 0.0 gal/min (0.0 l/min)
- during stand-by
- Energy consumption:1.2 kWh while processing; 0.12 kHz in stand-by
- Dimensions: 34.7" L x 26.4" W x 17" H (88 x 66 x 42 cm)
- Weight (empty/filled): 58.4 / 75 lb (26.5 / 34 kg)
- Electrical connections: 115 V ± 15%; 50/60 Hz; 230 V ± 15%; 50/60 Hz
- Water connection: 3/4"; 29 – 145 psi; (3/4"; 2 – 10 bar)