The Thermo Forma Steri-Cycle 370 CO2 Incubator provides accurate direct-heat temperature control and high-temperature decontamination cycles in a space-saving double-stack format featuring two separate incubators with the footprint of a single unit.
Featuring a dependable long-term performance and high culture space capacity, the Steri-Cycle incubator provides continuous protection against unwanted airborne contaminants and simplified routine cleaning.
Total contamination control is part of the Steri-Cycle 370’s unique design. The in-chamber HEPA air filtration system continuously removes invading particulates and maintains your important cultures in cleanroom-like Class 100 air quality conditions. Additionally, an on-demand 140°C high temperature sterilization cycle reliably eliminates contamination from all internal surfaces, simplifying cleaning procedures.
The Forma Steri-Cycle 370 is also equipped with a patented in-chamber HEPA air filtration system that continuously filters the entire chamber volume every 60 seconds, reducing particulates to Class 100 cleanroom levels preserving the aseptic culturing environment.
|Specifications (Each Unit In Stack):|
|Temperature Range||5°C above ambient to +50°C (122°F)|
|Temperature Uniformity||±0.3°C at 37°C|
|Tracking Alarm||User-programmable low|
|Overtemperature||Sensor shuts off heat; setability: 0.1°C|
|Cycle Temperature||140°C (284°F) |
|Cycle Length||Under 12 hours|
|CO2 Concentration Range||0 to 20%|
|CO2 Sensor||T/C Sensor|
|Relative Humidity||Ambient to 95% at 37°C|
|Unit Heat Load||293 BTUH (86 watts)|
|Capacity||6.5 cu. ft. (184.1 L)|
|External Dimensions||25" W x 23.6" D x 39.5" H (63.5 x 59.94 x 100.33 cm)|
|Weight||260 lbs. (117.93 kg.)|