The Waters Acquity UPLC 30 cm Column Heater/Cooler (CHC) is designed for high-resolution separations that use temperature as a method parameter. With a temperature range from 4 to 65 °C, the unit can control up to four HPLC columns.

The Waters Acquity UPLC 30 cm Column Heater/Cooler (CHC) enables the user to upgrade LC instrumentation to the newest chromatographic capabilities, while retaining current methods until it's time to fully transition to UPLC.

Features:

• Accepts columns with internal diameters of up to 7.8 mm and lengths 300 mm
  
• Accepts columns that are plumbed in series
  
• Can be installed on a new or existing ACQUITY UPLC Systems

Specifications:

Number of columns: Accommodates multiple columns, serially connected columns can also be supported (up to six)
Column sizes: 20 to 300 mm length x 2.1 to 7.8 mm internal diameter (I.D.), plus either a guard column or an in-line filter (20 mm maximum)
Compartment temperature control: 4.0 to 65.0 °C in 0.1 °C increments
Compartment temperature measurement accuracy: ±0.8 °C (between 20.0 to 50.0 °C) ± 1.0 °C for remaining range.
Compartment operational temperature range: Cooling: 15 °C below ambient; Heating: 5 °C above ambient to 65 °C
Communications:Controlled by ACQUITY UPLC Sample Manager
Control software: ACQUITY UPLC console software v1.30 or higher
Dimensions: 8" W x 14" D x 21.8" H (20.3 x 35.6 x 55.2 cm)
Operating temperature range: 4 to 40 °C (39 to 104 °F)
Operating humidity range: 20% to 50%, non-condensing
Acoustic noise: < 65 dBA (instrument generated)
Airflow requirements: Clearance of 15 cm (6 in.) at the module’s rear